Fitting headlamp brackets and playing rear upper wishbones

67 + 1= 68hrs

Fitting the front headlamp brackets, confirmed from WF that I was using the right spacer to add to these, I’ll confirm the exact size if taht helps someone!

Pop riveted the mounts too to ensure they were 100% secure

also tied fitting the rear upper wishbones with my new 4 and 4.5 inch bolts – which WF kindly sent after a few chases

So going for a 4 inch bolt for the upper rear wishbone – 4.5 inch looks a tad too long

The problem of today is that one of the bushes now pressed into the wishbone has what looks like a square hole, rather than round!

After trying to hammer through a bolt to try and re shape the hole i didnt get too far. pictures included.

 

I may try and shape this a little with the dremmel, not making the hole too big though, a bit of work may help.

Post a comment or leave a trackback: Trackback URL.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: